Can you help me set-up the cut length counter fitted to my cutting machine?
The Vac-U-Torq®, Neuma-Torq®, Bench-Cut® & Econo-Cut® rotary cutter ranges were manufactured between 1984 & 2002.
Over this period a number of different cut length counters where used.
The most frequent were:
- Kübler 426.
- Kübler 327.
- Kübler 611.
- Kübler 325 (as a batch counter).
- Hengstler Tico 732.
- Veeder-Root C345.
Some of these counters are now either obsolete or becoming difficult/impossible to source as spare parts.
In certain cases it might be possible to convert the machine to operate with an alternative length counter.
For assistance please contact our Tech Team via email: tech@gillardcutting.com
Downloads (PDF):
> Cut length & total cuts counter settings.
> Kübler 426 cut length counter manual.
> Kübler 426 counter setting drawing.
> Kübler 426 to Hengstler Tico 732 conversion instructions.
> Kübler 327 to Hengstler Tico 732 conversion instructions.
> Hengstler Tico 732 cut length counter settings.
> Kübler 327 cut length counter settings.
> Kübler 325 batch counter manual.
> Hengstler Tico 732 length counter manual.
