How do I adjust the SRB control board?

The Vac-U-Torq®, Neuma-Torq® & Econo-Cut® rotary cutters used a SRB control board to control the vacuum & penumatic clutch/brake systems.

There were four types of board used:

  • SRB 111 - an open circuit board that was used on the early Vac-U-Torq® machines.
  • SRB 3110 - an enclosed circuit board fitted with overload protection.
  • SRB 3101/02 - compact circuit boards.
  • SRB 3107 - a compact circuit board.

There were also SRC photo-eye discs which were used to set the stop/start position of the clutch/brake.

For more assistance please contact our Techncial Team via email: tech@gillardcutting.com

Downloads (PDF):

> SRB 111 terminal & jumper switch settings.

> SRB 111 datasheet.

> SRB 3110 datasheet.

> SRB 3110 settings.

> SRB 3101 datasheet.

> SRB 3107 datasheet.

> SRC 1301 instructions.