How do I adjust the SRB control board?
The Vac-U-Torq®, Neuma-Torq® & Econo-Cut® rotary cutters used a SRB control board to control the vacuum & penumatic clutch/brake systems.
There were four types of board used:
- SRB 111 - an open circuit board that was used on the early Vac-U-Torq® machines.
- SRB 3110 - an enclosed circuit board fitted with overload protection.
- SRB 3101/02 - compact circuit boards.
- SRB 3107 - a compact circuit board.
There were also SRC photo-eye discs which were used to set the stop/start position of the clutch/brake.
For more assistance please contact our Techncial Team via email: email@example.com