Servo-Torq® Free-standing rotary cutters
A stand‐alone rotary cutter for when you already have a caterpillar infeeder/puller machine.
More informationThe Servo‐Torq® range of fly‐knife rotary cutters extend from table‐top versions to ultra-high performance machines. Cutting capacities range up to 300 mm outer diameter with six levels of cutting power.
Every Servo‐Torq® cutter uses the latest Lenze digital AC servo technology to control the flying knife rotary blade cutting action. The high speed slicing cut action ensures optimum cut quality. Advanced software control is used to ensure precise cut length control at the highest cut rates.
The high-level performance ensures that your cutting requirements & budget can be precisely matched at an affordable price.
Servo‐Torq® rotary cutters:
A stand‐alone rotary cutter for when you already have a caterpillar infeeder/puller machine.
More informationFree-standing rotary cutters to handle larger diameter products from 150 mm to 300 mm outer diameter.
More informationOur all-new Servo-Torq® Slice-Cut™ is designed to cleanly cut larger sized rigid plastic extrusions.
More informationOur compact rotary cutter is aimed at lighter duty cutting applications. Despite the small foot-print, this machine can perform.
More informationOur compact cutter but with a slider base for lighter duty in-line cutting requirements.
More informationPrecision engineered for cutting medical tubing, including bubble, taper & bump tube.
More informationOur workhorse rotary cutters combined with an integral Accra‐Feed™ caterpillar infeeder/puller fitted with 550 mm long belts.
More informationOur heavy‐duty rotary cutters with integral Accra‐Feed™ caterpillar infeeder/puller.
More informationOur super heavy‐duty rotary cutters with torque enhancer gearbox & integral Accra‐Feed™ caterpillar infeeder/puller.
More informationDesigned for cuffed tube applications such as complex automotive fuel & washer pipes, medical respirator tubing and concertina plumbing pipe.
More informationDesigned to cut right or left-handed spirals in plastic tubing used for cable-wrap.
More informationFree-standing rotary cutters with integral infra-red or hot air pre-heater tunnels.
More informationFor an improved hygiene standard and a longer machine life
More informationThe latest New Generation cutting machines for even higher extrusion linespeeds and faster cut rates.
More informationDesigned to cut multiple extruded ropes at high speed.
More informationOptimised for the food extrusion market. This means upgraded hygiene standards, integrated dust extraction & heat resistant components.
More informationDesigned for easy in-line cutting of extruded soap, toilet rim block & gels, directly after the plodder extruder.
More informationOur cutting cell consists of a Servo‐Torq® Mini rotary cutter with sonar loop tension control & a motorised pay‐off stand.
More informationA range of optional items & accessories to optimize your Gillard machine. These can enhance the standard machine to improve performance & give access to a range of special features.
A clear & easy-to-read display of caterpillar belt speed in m/min. Allows linespeed to be read from a distance.
More informationA digital counter linked to the belt adjustment hand-wheel. Ensures precise & repeatable nip distance settings.
More informationA 6-position turret stop for quickly setting the nip distance gap between the upper & lower caterpillar belts.
More informationFor automatic low tension speed control of flexible extrusions.
More informationAn adjustable height slitter blade that can be integrated into one of our medium-duty caterpillar pullers.
More informationA range of optional items & accessories to optimise your Gillard machine. These can enhance the standard machine to improve performance & give access to a range of special features.
For an improved hygiene standard and a longer machine life
More informationMakes it much easier to thread-up a free-standing cutter & change knife blades & cutter guide bushes.
More informationDesigned to accept our RAZOR & CHIP blades for flexible extrusions.
More informationFor super-high speed cutting of up to 12,000 cuts/minute.
More informationBy blowing a fine mist of liquid onto the knife cut, cut quality can be significantly improved.
More informationSuper hard finish ideal for medical tube cutters.
More informationHeating rigid plastics can significantly improve the cut finish.
More informationDesigned to warm semi-rigid & rigid plastic tubes before cutting.
More informationDesigned to warm rigid plastic pipe & profile prior to the cutter.
More informationAllows for the quick & safe change-over of product guide bushes away from the cutting machine.
More informationAdd-on cutter head option for cutting angles on flexible & semi-rigid tube in-line.
More informationGives accurate cut length control when working with rigid plastic pipe & profile up to 600 mm long.
More informationHeating the knife blade can improve the cut quality for some rigid plastic extrusions.
More informationHeating the inlet bush warms the extrudate to help improve the cut finish especially when cutting rigid plastics.
More informationOur range of low tension semi-automatic coilers are designed for smaller flexible tube & profile, where a more delicate coil is required.
We have single & twin head machines is a range of formats & styles:
An extensive selection of single & multiple head de-coilers for use with our Servo-Torq® rotary cutters & Braid-Cut™ circular blade cutters:
Designed for smaller flexible tube and profile where a more delicate coil is required.
More informationDesigned for small to medium flexible tube and profile where a more delicate coil is required.
More informationDesigned for small to medium flexible tube & profile, where a more delicate coil is required.
More informationSimple machines for low-level reeling requirements.
More informationA range of reels, drums or collapsible core mandrels are available to suit a variety of extruded products & coiling requirements.
More informationWe have a range of standard pay‐off units for use with coiled material when cutting off‐line.
More informationFor un-coiling from heavier wooden or metal drums.
More informationRange of motorised de-coilers for the controlled pay-off of extruded material from drums. They can work in-line or off -line.
More informationSpecial cutters & puller units designed for extruded food products such as toasted bread, croutons, bread sticks & dog chews.
All machines are finished to the highest hygiene standards, with FDA approved materials being used where appropriate.
The latest New Generation cutting machines for even higher extrusion linespeeds and faster cut rates.
More informationDesigned to cut multiple extruded ropes at high speed.
More informationOptimised for the food extrusion market. This means upgraded hygiene standards, integrated dust extraction & heat resistant components.
More informationHigh-speed, high-accuracy, multi-head cutters for up to six lanes of extruded product.
More informationHigh-speed cutting in-line after the extruder.
More informationMoving-head former & needle punch machine for extruded dog chews.
More informationFor creating a twist or spiral when pulling extruded plastic or food products.
More informationA conveyor belt positioned after the cutter will automate cut piece collection. It gives improved cut length accuracy & cut quality by supporting the extrusion as it exits the cutter.
This can also enhance quality by automatically separating scrap cut lengths from good product.
The most popular type of collection system is the high pressure air jet option, where cut lengths are blown off the side of the belt.
The air nozzle design spreads the air blast over the widest belt area, to ensure a smooth discharge of the cut length into the collection bin.
Mechanical plough & push-off arms are also available. Multiple bin collection systems can be configured, with separate zones for scrap lengths.
A conveyor belt positioned after the cutter will automate cut piece collection.
More informationHigh speed batch collection of cut lengths from both sides of the conveyor belt.
More informationDesigned for heavier products that our air-blast system can't handle.
More informationThe simple solution to push cut pieces off the conveyor belt into a collection bin.
More informationTo automate the collection of rigid plastic pipe & profile.
More informationDesigned to automatically collect short cut lengths at high cut rates.
More informationSpecial sensing systems for cuffed, corrugated, bubble & taper tubing.
These systems can be fitted to our range of Servo-Torq® fly-knife rotary cutters.
A variety of sensing systems can be provided:
Designed for cuffed tube applications such as complex automotive fuel & washer pipes, medical respirator tubing and concertina plumbing pipe.
More informationThe high resolution digital camera system provides instant cuff detection with excellent accuracy.
More informationDigital micrometer uses a high intensity green LED light source to sense tube of up to 50 mm outer diameter.
More informationFor accurate detection of medical bubble & bump tubing up to 25 mm outer diameter.
More informationBasic sensing system for easier targets such as net pipe or simple cuffs.
More informationTo accompany our range of rotary fly-knife rotary cutters, we also have an extensive selection of circular blade cutting systems for tougher extruded products:
This advanced machine cuts through stainless braided hose cleanly, using an integral welding head to fuse the wire ends together.
More informationThe heavy-duty version of our Braid-Cut MT machine for stainless steel braided PTFE & rubber hose up to 50 mm outer diameter.
More informationThese up‐stroke travelling-head circular saws provide at cost effective answer for cutting rigid plastic pipe & profile.
More informationThe swivel turn-table cutter head allows a range of cut angles.
More informationDesigned to cut all types of metal reinforcement, including wire, punched or stamped strip & continuous rolled profile.
More informationBelt lengths from 250 mm to 1800 mm.
A range of tough twin-belt caterpillar haul-off/puller units designed to handle the vast majority of extrusion pulling & feeding requirements.
All our caterpillar machines feature twin direct-drive AC servo motors; one motor/drive per belt, for improved pulling power via sealed-for-life planetary gearboxes.
They also come with a Siemens 4.3" colour touch-screen operator panel as standard.
UA Servo – For high linespeeds & the tightest extrusion tolerances:
Ideal for smaller flexible & semi-rigid extrusions being pulled at all linespeeds.
More informationThe work-horse machines in our range.
More informationDesigned for the toughest pulling jobs. These haul-offs are engineered for heavier wall rigid pipe & profile.
More informationFor creating a twist or spiral when pulling extruded plastic or food products.
More informationDesigned to compress or scrunch together plastic corrugated concertina plumbing pipe up to 110 mm OD.
More informationOur all-new Servo-Torq® Slice-Cut™ is designed to cleanly cut larger sized rigid plastic extrusions.
The maximum pipe outer diameter size is 225 mm.
The ultra-fast blade speed ensures a clean cut finish when cutting rigids.
The large curved blade gives an extreme slice cut to improve the cut finish.
The blade can either be heated or lubricated if required.
A full colour touch-screen control panel is provided to enter the cut length and blade speed.
The machine if fully guarded to the latest CE standards.